24hr response
01527 595444


In stock
Product Details


  • Switchable input attenuation: 0dB for guitar-type pickups, 20dB for line level signals, and 40dB for speaker feeds
  • Matches the level and impedance with unity gain without loading the source
  • Can drive signals up long cable lengths
  • Powered from console phantom power or internal battery
  • Automatic switchover to battery if phantom power fails
  • Parallel Link Jack output to feed amplifiers directly
  • Parallel XLR input for converting unbalanced outputs to balanced lines


  • Input: 1M Ohm (pad at 0dB)
  • Impedance: 47k Ohm (pad at -20dB). 47k Ohm (pad at -40dB)
  • Max Input: +9dBu (pad at 0dB)
  • Level: +29dBu (pad at -20dB). +49dBu (pad at -40dB)
  • Input Connectors: Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced). Jack: Tip Hot (+ve), Sleeve Ground. XLR: Pin 2 Hot (+ve), Pin1 & 3 Ground
  • Output: Transformer; Balanced
  • Max. Output Level: +8dBu into 600 Ohms or greater
  • Output Connector: XLR3-32 or equivalent
  • Distortion (THD): < 0.005% at 1kHz, 0dBu output
  • Noise: <-105dB unweighted, 22Hz-22kHz, rms
  • Frequency Response: 30Hz to 20kHz, +0dB/-1dB
  • Main/Standby: 9 volt PP3 type, battery preferably alkaline
  • Current drain: On phantom; less than 7.5mA. On battery; less than 2mA
  • Phantom Power: +20 volts DC to +48 volts DC
  • Weight: 650 gms, excluding batteries
  • Overall Dimensions: 59 mm x 124 mm x 143 mm (2.3“ x 4.9“ x 5.6“)
Save this product for later