24hr response
|
01527 595444

DPA 4166 d:fine HEADSET MIC FOR SHURE/SENNHEISER BELT PACKS

In stock
1
Product Details
  • Directional pattern - Omnidirectional
  • Principle of operation - Pressure
  • Cartridge type - Pre-polarized condenser
  • Frequency range - 20 Hz - 20 kHz
  • Frequency range, ±2 dB -20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz
  • Sensitivity, nominal, ±3 dB at 1 kHz - 6 mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted - Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4 - Typ. 38 dB (max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) - Typ. 68 dB(A)
  • Total harmonic distortion (THD) - Legacy - < 1% THD up to 123 dB SPL peak, < 1% THD up to 120 dB SPL RMS sine
  • Total harmonic distortion (THD) - CORE - < 1% THD up to 137 dB SPL peak
  • Dynamic range - Legacy - Typ. 97 dB
  • Dynamic range - CORE - Typ.   111 dB
  • Max. SPL, peak before clipping - 144 dB
  • Output impedance - From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
  • Cable drive capability - Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
  • Power supply (for full performance) - For wireless systems: Min. 5 V - max. 50 V through DPA adapter.
  • Connector - MicroDot
  • Colour - beige
  • Weight - Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)Microphone diameter - 5.4 mm (0.21 in)
  • Microphone Diameter - 5.4mm (0.21 in)
  • Microphone Length - Boom length: Normal: 120 mm (4.7 in), Medium: 100 mm (3.9 in)
  • Cable length - 1.3 m (4.3 ft)
  • Cable diameter - 1.6 mm (0.06 in)
  • Polarity - +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
  • Temperature range - -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH) - Up to 90%
 
Save this product for later