24hr response
|
01527 595444

LIGHTWARE 1 WAY DVI/RJ45 CAT5/6 SYSTEM

In stock
1
Product Details
HDMI-TPS-TX95 and HDMI-TPS-RX95 twisted pair HDBaseTTM extenders provide extension of uncompressed Full-HD video for long distances over a single CATx cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and work at all standard AV resolutions up to 4K and 48-bit color depth handling all standard audio formats and also 120 Hz 3D signals. Remote powering is available through a single CATx cable, but a local power supply can also be used. All devices can be mounted on a rack shelf or used standalone. The Auto operation mode allows the device to detect the far end extender’s mode and adopt it. If the far end device is in Auto mode or it is a third party HDBaseTTM device the link will be set to HDBT mode. If the far device is in forced Long Reach Mode then the auto operation will set the Link to Long Reach Mode. Specifications:
  • Data Rate: 3.4 Gbps per color
  • Resolution: All HDMI 1.4a resolutions supported
  • Equalization: adaptive, automatic
  • EDID Support: Transparent
  • HDCP Pass-through: Yes
  • Ethernet Pass-through: Yes
  • RD-232 Pass-through: Yes
  • IR Pass-through - Yes
  • Overall Signal Delay: 10µs (including 100m CATx cable
  • Power: Universal Power Adaptor, DC 12 V 2.5 A
  • Power Consumption (-TX): 3.6W (typ) 4.2 W (max)
  • Power Consumption (-RX): 5.3 (typ) 6.1 W (max)
  • Enclosure: 1mm metal
  • Dimensions (W x D x H): 100.4 x 100.4 x 26mm
  • Net Weight: 330g/product
  • Compliance: CE
Connectors:
  • TX Input, RX Input: DVI Connector
  • TX Output, RX Input: RJ45 (TPS interface)
  • Ethernet: RJ45
  • IR in, out: 3.5mm TRS Connector (1/8" mini-jack)
  • Serial Port: 9-Pole D-Sub
  • Power: Locking DC Connector (2.1 / 5.5mm)
 
Save this product for later